121
WT07627X03
6-5-4. Floor Layout settings for Integrated Centralized Control Web
Assign the air conditioning unit icons to display on the Integrated Centralized Control Web floor layout.
Note: Assignment of unit groups registered in the centralized controllers selected as “Managed centralized controller” on the “Floor
for Integrated Centralized Control Web” screen is possible.
(1) Click [Floor Settings] > [Floor Layout for Integrated Centralized Control Web] to access the Integrated
Centralized Control Web’s floor layout settings screen.
(2) In [Target centralized controller], select a target centralized controller.
Note: Make sure to select a target centralized controller set in section 6-5-3 “Floor settings for Integrated Centralized Control
Web”.
(3) In [Floor switching], select a floor to which the unit groups are assigned.
The floor layout set in section 6-5-3 “Floor settings for Integrated Centralized Control Web” will appear.
(4) In [Centralized controller switching], select a centralized controller of the unit group to assign.
(5) In [Groups to be assigned], select a unit group to assign.
Note: Groups of air conditioners, Air To Water (PWFY) units, LOSSNAY units, and general equipment can be assigned to the
floor layout.
(6) In the floor layout in [Assignment area], assign unit group icons.
Air conditioning unit group
Assign on the floor plan
image.
Floor switching
Groups to be assigned
Target centralized
controller
Assign with gridline
Selecting this enables
movement in grid units.
Save
Back
Group name
Centralized controller
switching
Assignment mode/
Deletion mode
Scroll bar
Assignment area
To Next Page
Loading...
Need help?
General
