88
WT07627X03
5-5-2. Building Manager
On the [Building Manager] screen, the user names and passwords of building managers can be changed, and the
available functions for building managers can be limited.
For example, you can allow building managers to change the group name settings when the tenant is changed, or
disallow them to change the basic system settings such as unit settings or network settings.
Touch [User Info] in the menu bar, and then touch [Building Manager].
Note: The Building Manager settings are required for each AE-200/AE-50.
(1) To change the building manager’s user name or password, touch the [User name], [Password], and [Retype
password] buttons. Enter new information on the keyboard.
Note: The user name must contain only alphanumeric characters.
Note: The user name and password are case-sensitive.
Note: The user name must be in 20 characters or less, and the password in 3 to 10 characters.
(2) Touch the functions to be made available for building
managers. The selected functions will appear with an
orange frame.
Touch again to deselect.
For more information on each function, refer to the table
below.
Note: If the user logs in as a building manager, the currently
available functions can be checked, but cannot be changed.
Note: The settings on this screen will not be reflected to the
functions on the Web browser.
(3) Touch [Save Settings].
Building manager’s user
name and password
User name and password
can be changed.
Save Settings
Touch to save the changes
made.
Available Functions
Select the available
functions for building
managers.
To Next Page
Loading...
Need help?
General
