136
WT07627X03
7. Settings using Web Browser for Initial Settings
7-1. Initial Settings
This section explains how to set the initial settings on the Web Browser for Initial Settings.
Note: When one or more AE-50/EW-50 controllers are connected, initial settings must be made on each AE-50/EW-50’s Web
browser. However, only Date and Time settings (section 7-1-1 “Date and Time”) and Basic System settings (section 7-1-2
“Basic System”) must be made on the AE-200 Web browser.
Important
● If the system is connected to a TG-2000A, make or change all settings from the TG-2000A so that the data in the
TG-2000A and AE-200 will match.
● Any control (such as interlock control or Peak Cut control) between the outdoor and indoor units connected to the AE-200,
AE-50, and EW-50, as well as between the units connected to different AE-50/EW-50 controllers, cannot be performed.
To Next Page
Loading...
Need help?
General
