To Next Page

To Previous Page

WT07627X03

4-5. License registration for optional functions

There are two ways to register the license — from the AE-200’s LCD, and individually from the AE-200/AE-50/

EW-50 Web Browser for Initial Settings.

Please contact your dealer as regards optional functions and purchasing license numbers.

Note: After the “Integrated Centralized Control Web” license is registered, licenses can be registered on the Integrated Centralized

Control Web. For details, refer to [Settings] – [Initial settings] – [License Registration] in the Instruction Book (Integrated

Centralized Control Web).

[1] When registering a license on the AE-200’s LCD

Touch [Initial Settings] in the menu bar, and then touch [License].

Note: The current date and time settings are required for license registration. Refer to section 5-1-3 “Date and time” for date and

time settings.

Note: The license registration is required for each AE-200/AE-50/EW-50.

Note: The [Controller] setting will appear (only on the AE-200’s LCD) when the [System Exp] setting on the [Unit Info.] screen is set

to [Expand]. Switch the [Controller] setting between [AE200] and [Exp1] through [Exp4] to register licenses for each AE-200,

AE-50, and EW-50 individually.

Important

● When one or more AE-50/EW-50 controllers are connected, licenses for the AE-50/EW-50 must be registered with the

AE-50/EW-50 properly connected to ensure proper settings.

(1) In the [Selecting Optional Function] section, select the optional function to be registered. The current

availability will appear in the [Current Status] section.

(2) In the “License number entry field” button, enter the license number and touch [Register the license].

In the [Current Status] section, a word [Available] will appear.

If the registration is unsuccessful, verify that the selected optional function and the license number are correct.

Note: Alphabet “O” and “I” are not used for license number.

Controller

Select [AE] to register

licenses for AE-200, and

select [1], [2], [3], or [4] to

AE-50/EW-50.

Selecting Optional

Function

Select the optional function

to be registered.

Current status

This indicates whether the

optional function is available

for use.

Serial No.

License number entry field

Touch to register the license.

Mitsubishi AE-200A User Manual

Questions and Answers: