6
- 161
6.26 Device Initial Value
6
FUNCTIONS
(5) Procedure and setting for use of device initial values
In order to use the device initial values, the device initial data must be created with GX
Developer in advance, and this data must be stored as a device initial value file in the
CPU module program memory, standard RAM or memory card.
Note6.70
Note71
• Add the device initial value data in the project data list of GX Developer.
As the device initial value range setting screen appears, set the device initial
value range.
• Add the device memory data on the project data list of GX Developer.
As the device memory screen appears, set the device initial value data in the
device initial value range set above.
Note71
Diagram 6.92 Device initialization range setting screen, device memory screen
Basic
Note6.70
The Basic model QCPU does not support the memory card.
Basic
Note6.70
To Next Page
Loading...
