8
- 22
8.1 PLC Parameters
8.1.2 High Performance model QCPU, Process CPU, Redundant CPU
8
PARAMETERS
(7) Program
When writing multiple programs to the CPU module, set the file names and execution
types (execution conditions) of the programs.
Diagram 8.18 Program
Table8.18 Program list
Item Parameter No. Description Setting range Default value Reference
Program 7000
H
When writing multiple programs
to the CPU module, set the file
names and execution types
(execution conditions) of the
programs.
Also set the fixed scan interval
(execution interval of fixed scan
execution type program).
• Program name
• Execution type (fixed scan
interval when fixed scan
execution is selected)
• File using method setting
• I/O refresh setting
No setting Section 3.3.6
To Next Page
Loading...
