Mitsubishi Q02CPU

8
PARAMETERS
8.1 PLC Parameters
8.1.2 High Performance model QCPU, Process CPU, Redundant CPU
8
- 23
1
Overview
2
Performance Specification
3
Sequence Program Configuration and Execution Conditions
4
I/O Nunber Assignment
5
Memories and Files Handled by CPU Module
6
Functions
7
Communication with Intelligent Function Module
8
Parameters
(8) Boot file
Make the settings to execute boot run and automatic write to standard ROM.
Diagram 8.19 Boot file
Table8.19 Boot file setting list
Item Parameter No. Description Setting range Default value Reference
Boot option
Clear
program
memory
7000
H
Set whether the program
memory will be cleared or not at
boot.
Do not clear/Clear program
memory at boot
Do not clear
program memory at
boot
Section 5.2.7
Section 5.2.8
Auto
Download
all Data
from
Memory
card to
Standard
ROM
Set whether the memory card
data will be automatically written
to the standard ROM or not at a
boot.
Do not perform/Perform
automatic all data write from
memory card to standard ROM
Do not perform
automatic all data
write from memory
card to standard
ROM
Boot file setting
Set the type, data name and
transfer source drive of the boot-
run file.
Type, data name, transfer
source drive (transfer source
drive is automatically set by the
program memory)
No setting