Mobotix T25 - Page 103

103/128
Setting Up Computers as T25 Remote Stations
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
5. If an NTP time server has not been entered and the camera/Door Station is not
being used as a master time server camera, you can set the camera time to the
computer's clock:
• Uncheck the synchronizing options and click Apply.
• The camera/Door Station is reconfigured and restarted.
• Wait until the restart (or reboot) of the Door Station is complete. The time of the
computer on which you are working right now will be displayed.
• Click Set Date and Time Now to synchronize the camera's/Door Station's time
with the computer's local time for the first time.
6. Click OK to confirm.
Note
The time display in the title bar of the main window will blink if the system time of an
active camera (Live view) in the main window deviates from the system time of the
computer by more than 15 seconds. In this case, check the computer to see if it is
also synchronized with a time server. Try to set up the same time server for both the
computer and the cameras/door stations.