EasyManua.ls Logo

Mobotix T25 - Multiple Doorbells and Voice Mailboxes (Addressees)

Mobotix T25
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16/128
T25 System Manual Part 2: Overview of Application Scenarios
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
1.2.2 Multiple Doorbells and Voice Mailboxes (Addressees)
In addition, the T25 system oers the possibility of entering a special contact number
on the KeypadRFID (similar to a telephone number) to ring at the remote station of one
specific user or user group (“addressee”) only. If a BellRFID module is installed, the visitor
can press the doorbell of the corresponding addressee. If the addressee does not respond
within a certain period of time, the visitor can leave a message on the voice mailbox (just
like on a mobile phone).
In the example with the Smith family (see
Section 1.1.2
), a visitor can select to ring the door-
bell for the entire family or specifically for the daughter, Anna, who lives on the third floor.
Setting Up Additional Doorbells/Mailboxes at the KeypadRFID Module
Contact numbers are important if you wish to set up additional doorbells and voice mailboxes
in the system. When you set up the user cards, you can also create up to 16 dierent contact
numbers in the system (
Section 2.2.3, «Adding User Cards at the KeypadRFID Module»
). You
can set up several cards to employ the same contact number, which means that they are
assigned to the same addressee.
In addition to the Family’s standard doorbell and voice mailbox, which do not have an
extra contact number, Mr. Smith has set up a separate doorbell and voice mailbox for his
daughter, Anna (by assigning contact number1 to Anna’s user card). This way, when visitors
ring the doorbell with contact number1, only the video phone in Anna’s room is ringing.
Assigning Additional Doorbells/Mailboxes at the BellRFID Module
When setting up the BellRFID module and also at a later time, you can assign user cards to
the individual bell buttons (see
Section 2.3.5, «Adding User Cards at the BellRFID Module»
).
Similar to above, you can also assign several user cards to each bell button.
Addressee Function
Smith Family
Anna Smith
Smith
Family
or or
Smith Family
Anna Smith
,
Anna Smith
,
Anna Smith
,

Table of Contents

Other manuals for Mobotix T25

Related product manuals