Mobotix T25 - Page 37

37/128
Step2: Set Up the KeypadRFID Access Module
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Switch on Add Mode Again (If Necessary):
1. Switch on Configuration mode: Press the OK/MENU button until you hear the second
beep (button flashes blue).
2.
Hold your admin card up to the KeypadRFID buttons until the OK/MENU button lights
up blue continuously.
3. Switch on Access Configuration mode: Briefly press the blue key button, which then
lights up blue.
4. Enter Add mode: Press the OK/MENU button until you hear the second beep again
(button lights up blue again).
hold (2nd beep)
OK
hold (2nd beep)
OK