Mold-Masters TempMaster MT - 9.5.7 MT-12-12 and MT-18-xx; 9.5.8 MT-12-12 and MT-18-xx for UK and Europe

9.5.7 MT-12-12 and MT-18-xx
WARNING
Two di󰀨erent congurations are used with MT-12-12 and MT-18-xx
systems, depending on the geographic location of the controller. It is the
responsibility of the integrator to identify and implement the correct tool
wiring.
9.5.8 MT-12-12 and MT-18-xx for UK and Europe
Figure 9-16 Inserts for MT-12-12 and MT-18-xx
9-12
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.
WIRING DETAILS
MT Controller User Manual