Mold-Masters TempMaster MT - Section 1 - Introduction; 1.1 Intended Use; 1.2 Release Details; 1.3 Warranty Details

Section 1 - Introduction
The purpose of this manual is to assist users in the integration, operation and
maintenance of the MT and MT2 controller. This manual is designed to cover
most system congurations. If you need additional information specic to your
system please contact your representative or a Mold-Masters o󰀩ce whose
location can be found in the “Global Support” section.
1.1 Intended Use
The MT Series controllers have been designed as a multi-channel
temperature controllers for use in hot runner plastic molding equipment. They
use feedback from thermocouples within the nozzles and manifolds to give
precise closed-loop temperature control, and they are designed to be safe
during normal operation. Any other uses would fall outside the engineered
intent of this machine which may be a safety hazard and would void any and
all warranties.
This manual is written for use by skilled persons who are familiar with
injection molding machinery and their terminology. Operators should be
familiar with plastic injection molding machines and the controls of such
equipment. Maintenance persons should have su󰀩cient understanding of
electrical safety to appreciate the dangers of 3-phase supplies. They should
know how to take appropriate measures to avoid any danger from electrical
supplies.
1.2 Release Details
Table 1-1 Release Details
Document Number Release Date Version
MT-UM-EN-00-04-5 July 2019 04-5
1.3 Warranty Details
Warranty details are provided with your order documentation.
1.4 Returned Goods Policy
Please do not return any parts to Mold-Masters without pre-authorization and
a return authorization number supplied by Mold-Masters.
Our policy is one of continuous improvement and we reserve the right to alter
product specications at any time without giving notice.
1.5 Movement or Resale of Mold-Masters
Products or Systems
This documentation is intended for use in the country of destination for which
the product or system was purchased.
Mold-Masters takes no responsibility for documentation of products or
systems if they are relocated or resold outside the intended country of
destination, as stated on the accompanying invoice and/or waybill.
1-1
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.
INTRODUCTION
MT Controller User Manual