Motorola Solutions AP-6511 Access Point System Reference Guide
6-24
7. Select existing inbound and outbound MAC Firewall Rules using the drop-down menu. If no rules exist,
select Create to display a screen where Firewall rules can be created.
8. Select the + Add Row button.
9. Select the added row to expand it into configurable parameters.
Figure 6-11 MAC Firewall Rules screen
Action The following actions are supported:
Log—Creates a log entry that a Firewall rule has allowed a packet to either
be denied or permitted.
Mark—Modifies certain fields inside the packet and then permits them.
Therefore, mark is an action with an implicit permit.
Mark, Log — Conducts both mark and log functions.
Precedence Use the spinner control to specify a precedence for this IP policy between
1-1500. Rules with lower precedence are always applied first to packets.
Description Provide a description up to characters long for rule to help differentiate it
from others with similar configurations.
To Next Page
Loading...
