Motorola Solutions AP-6511 Access Point System Reference Guide
7-52
9. Refer to the System Event Messages field to define how system messages are logged and forwarded
on behalf of the profile.
Select the Enable System Events radio button to allow the profile to capture system events and append
them to a log file. It’s important to log individual events to discern an overall pattern that may be
negatively impacting performance. This settings is enabled by default.
Select the Enable System Event Forwarding radio button to enable the forwarding of system events.
This setting is enabled by default.
10.Select OK to save the changes made to the profile’s Management Settings. Select Reset to revert to the
last saved configuration.
11.Select Firmware from the Management menu.
Figure 7-31 Profile Management Firmware screen
12.Refer to the Auto Install via DHCP field to define the configuration used by the profile to update
firmware using DHCP:
Enable Configuration
Upgrade
Select this option to enable automatic configuration file updates for the
profile from an external location. If enabled (the setting is disabled by
default), provide a complete path to the target configuration file used in the
update. To use this option, first create a Virtual Interface in the Interfaces
section and enable the Use DHCP to Obtain Gateway/DNS Servers option for
that Virtual Interface.
Enable Firmware
Upgrade
Select this option to enable automatic firmware upgrades (for this profile)
from a user defined remote location. To use this option, first create a Virtual
Interface in the Interfaces section and enable the Use DHCP to obtain
Gateway / DNS Servers option for that Virtual Interface. This value is
disabled by default.
To Next Page
Loading...
