Motorola AP-6511 - Page 356

Motorola Solutions AP-6511 Access Point System Reference Guide
12-30
4. Set the following Certificate Subject Name parameters required for the creation of the certificate:
5. Select the following Additional Credentials required for the generation of the CSR:
6. Select the Generate CSR button at the bottom of the screen to produce the CSR.
Certificate Subject
Name
Select either the auto-generate radio button to automatically create the
certificate's subject credentials or select user-defined to manually enter the
credentials of the self signed certificate. The default setting is auto-generate.
Country (C) Define the Country used in the CSR. The field can be modified by the user to
other values. This is a required field and must not exceed 2 characters.
State (ST) Enter a State/Prov. for the state or province name used in the CSR. This is a
required field.
City (L) Enter a City to represent the city name used in the CSR. This is a required field.
Organization (O) Define an Organization for the organization used in the CSR. This is a required
field.
Organizational Unit
(OU)
Enter an Org. Unit for the name of the organization unit used in the CSR. This
is a required field.
Common Name (CN) If there’s a common name (IP address) for the organizational unit issuing the
certificate, enter it here.
Email Address Provide an email address used as the contact address for issues relating to this
CSR.
Domain Name) Enter a fully qualified domain name (FQDN) is an unambiguous domain name
that specifies the node's position in the DNS tree hierarchy absolutely. To
distinguish an FQDN from a regular domain name, a trailing period is added.
ex: somehost.example.com. An FQDN differs from a regular domain name by
its absoluteness; as a suffix is not added.
IP Address Specify the IP address used as the destination for certificate requests.