Motorola Solutions AP-6511 Access Point System Reference Guide
3-12
For the purpose of this example, enter a SSID, and select PSK authentication, WPA2 encryption.
18. Select OK to exit the Add WLAN screen, then select Next to continue to the RADIUS Authentication
screen.
Figure 3-10 Initial Setup Wizard - RADIUS Authentication
19. As you did not select an authentication method that requires RADIUS, no action is required within this
screen. Select Next/Commit to continue to the AP Discovery screen.
VLAN Id Use the drop-down menu to select a VLAN to segregate traffic for this WLAN.
All configured VLANs are available for selection.
WPA Key Enter either an alphanumeric string of 8 to 63 ASCII characters or 64 HEX
characters as the primary string both transmitting and receiving authenticators
must share. The alphanumeric string allows character spaces. The AP-6511
converts the string to a numeric value. This passphrase saves the administrator
from entering the 256-bit key each time keys are generated.
To Next Page
Loading...
