MUTOH ValueJet 1304 - Disposal of Waste Fluids; Disposal Period; Disposal Method

User’s Guide ValueJet 1304
Installing the unit
32 AP-75780 - Revision 1.3
3.4 Disposal of waste fluids
3.4.1 Disposal period
Dispose of waste fluids in the following cases:
 When the waste fluid tank is more than half full.
 When “Waste Ink Tank Full” is displayed.
3.4.2 Disposal method
Step 1: Ready an empty container such as a supply waste fluid bottle, to contain the waste
fluid.
Step 2: Lay a protective material on the floor under the waste fluid tank.
Step 3: Open the waste fluid valve, and transfer the waste fluid to the container.
Important
 The waste fluid from the printer is industrial waste.
Proper waste fluid disposal according to industrial waste disposal laws and
ordinances of you local government is required.
Consign disposal of waste fluids to a specialized processor.
Note
 When transferring the waste fluid to the empty container, the waste fluid may
splash.
 When transferring the waste fluid to the empty container, put the container
underneath and close the waste fluid valve afterwards.
N° Description
1 Waste fluid valve
2 Empty container