MUTOH ValueJet 1304 - Flushing Return Count Menu; Side Margin Menu

User’s Guide ValueJet 1304
Handling the printer
AP-75780 - Revision 1.3 75
4
4.6.4 Flushing return count menu
Set the frequency that the print head returns to the original flushing box when setting “On
Media” in the flushing menu.
4.6.5 Side margin menu
Set up the right and left margins while printing.
Note
 When increasing the flushing return count, clogging may occur while printing
continuously.
Setup item Setting Description
Return count
Once to <5 times> to
999 times
Set the flushing return count.
Example:
Once: return to the original spitting box
every time the print head goes and returns
once.
5 times: return to the original spitting box
every time the print head goes and returns 5
times.
---
 ENTER: Saves the settings and shifts to
the previous hierarchy.
 CANCEL: cancels the settings and shifts to
the previous hierarchy.
Refer to:Panel Setup Menu on page62
Note
 When selecting “On Media” in the flushing menu, the value of the side margin
is set automatically.
Setup item Setting Description
Side margin
<3 mm> to 25 mm Set the side margins
---
 ENTER: Saves the settings and shifts to
the previous hierarchy.
 cancel: cancels the settings and shifts to
the previous hierarchy.
Refer to:Panel Setup Menu on page62