MUTOH ValueJet 1304 - Effect Menu

User’s Guide ValueJet 1304
Handling the printer
AP-75780 - Revision 1.3 71
4
Vacuum Fan menu
Sets up the vacuum fan operation
4.6.2 Effect menu
For more information and examples, check the i² In-The-Box documentation.
Setup item Settings Description
VacuumFan
Low
Set when there is a possibility of a paper
jam caused by failure in media loading
when using soft media
<High> Set when using general media.
---
 ENTER: saves the setting and shifts to the
previous menu.
 CANCEL: Cancels the setting and shifts to
the previous menu
Refer to:User media menu on page63
Thanks to Mutoh’s revolutionary i² technology, it is possible to
obtain impeccable printing quality even for the most difficult images.
Setup items Parameters Description
Effect
None
The effect function is not used ==> straight line
printing.
Wave
A wave pattern will be used to print the file without
the known artefacts such as banding, ink bleed,...
Please refer to the decision throughput path to know
which wave form to use for which application.
Refer to: Panel Setup Menu on page62
Fuzz
Fine&Wave
A-S.Fine&Wave
B-S.Fine&Wave
Note
 Most RIP software also allows controlling the weaving settings directly from
the RIP.