MUTOH ValueJet 1304 - Page 70

User’s Guide ValueJet 1304
Handling the printer
70 AP-75780 - Revision 1.3
Drier menu
Sets up the Drier temperature.
Set this menu to dry printed media.
StandbyHeating menu
Sets the time to preheater the heater while the printer is in standby mode.
Note
 Preset temperature of Drier varies depending on the media.
Setup item Settings Description
Drier
OFF/ <30°C> to 50°C
Sets up the Drier temperature.
1 = Roll media
2 = Drier
3 = Print head
---
 ENTER: saves the setting and shifts to the
previous menu.
 CANCEL: Cancels the setting and shifts to
the previous menu
Refer to:User media menu on page63
Setup item Settings Description
StandbyHeating
10 min to <60 min> to
240 min
Sets the time to preheat the heaters.
When more than the set time has passed.
all the heaters switch OFF
---
 ENTER: saves the setting and shifts to the
previous menu.
 CANCEL: Cancels the setting and shifts to
the previous menu
Refer to:User media menu on page63