MUTOH ValueJet 1304 - Done by Authorized Mutoh Technician; Periodical Replacement of Parts; Periodical Inspection Part List

User’s Guide ValueJet 1304
Periodical maintenance
AP-75780 - Revision 1.3 105
5
5.2 Done by Authorized Mutoh Technician
This section describes the periodical part replacement and the periodical inspections required
for this printer. Theses periodical services ensure the stable printing quality of this printer.
5.2.1 Periodical replacement of parts
Perform periodical replacements according to the table below. These replacements must be
executed by an authorized Mutoh technician.
5.2.2 Periodical inspection part list
Perform periodical inspections according to the table below and perform cleaning and part
replacement as necessary.
Part Timing
Maintenance station Once a year
Wiper Once a year
Damper Once a year
Part Timing Check point
Media guide
Sub platen front surface
Several times a year
Media dust accumulation
Foreign objects
Damages
Timing fence
(CR encoder detection slit plate)
Several times a year
Media dust accumulation
Foreign objects
Damages
Rail on the CR guide frame Several times a year Foreign objects
P_REAR sensor front surface Several times a year
Media dust accumulation
Foreign objects
Damages
Clean pressure rollers Several times a year
Media dust accumulation
Foreign objects