MUTOH ValueJet 1304 - Gateway Menu; Front Interlace Menu; Version Menu

User’s Guide ValueJet 1304
Handling the printer
86 AP-75780 - Revision 1.3
4.6.24 Gateway menu
Sets the gateway.
4.6.25 Front Interlace menu
Set the front treatment function.
This function is applied when the banding appears at the beginning of the print.
4.6.26 Version menu
Displays the version of the Firmware.
Note
 Be sure to set the gateway after consulting the network administrator.
Setup item Setting Description
Life times
000.000.000.000 to
<192.168.001.253>
to 255.255.255.255
Change the gateway by using the following
keys:
 +: increase the value
 -: Decrease the value.
 ENTER: Change the value for the next
segment
---
 CANCEL: Save the setting and shift to the
previous hierarchy.
Refer to:Panel Setup Menu on page62
Setup item Setting Description
Font Interlace
OFF The Front treatment function is not used.
ON The front treatment function is used.
---
 ENTER: saves the setting and shifts to the
previous menu.
 CANCEL: Save the setting and shift to the
previous hierarchy.
Refer to:Panel Setup Menu on page62
Setup item Setting Description
Ver.M/C
*.**(Main)/
*.**(Controller)
Displays the version of the firmware on the
main and controller side.
---
 CANCEL: Save the setting and shift to the
previous hierarchy.
Refer to:Panel Setup Menu on page62