MUTOH ValueJet 1304 - Winding Unit Menu

User’s Guide ValueJet 1304
Handling the printer
AP-75780 - Revision 1.3 77
4
Media width check menu
4.6.8 Winding unit menu
Set up whether the media width and edge will be detected when initializing the media.
Setup item Setting Description
Media width
****mm
Display the media width that is detected
while initializing.
---
 ENTER: Saves the settings and shifts to
the previous hierarchy.
cancel: cancels the settings and shifts to the
previous hierarchy.
Refer to:Panel Setup Menu on page62
Note
 When the winding unit is not installed, please do not set to “Type1” by doing
so, the product will be unable to function properly.
 When the winding unit menu is set to “Type 1”, the setting for the Prev. Stick
menu is disabled.
Setup item Setting Description
Take-Up
OFF No use of the winding unit
Type 1 Set to “Type 1” to use the optional winder
---
 ENTER: Saves the settings and shifts to
the previous hierarchy.
 cancel: cancels the settings and shifts to
the previous hierarchy.
Refer to:Panel Setup Menu on page62