MUTOH ValueJet 1304 - Origin Menu

User’s Guide ValueJet 1304
Handling the printer
78 AP-75780 - Revision 1.3
4.6.9 Origin menu
Set this menu when reprinting on the margin, when the printing data position is changed to
the position of the already printed media.
Setup item Setting Description
Origin
 X (media feeding
distance): 000 mm
to 9.999 mm
 Y (print head
transferring
distance): 000 mm
to 9.999 mm
Change the print head position and media
feeding distance with the following keys.
 >: Decrease the print head transferring
distance
 <: Increase the print head transferring
distance.
 +: Increase the media feeding distance
 -: Decrease the media feeding distance
1: Starting position
2: Media feeding direction
ENTER: Display “Moving Origin Pos.” and
move the print head to the starting position.
Confirm
Position==>E
ENTER or after a certain period of time: the
setting value is determined. Print head
returns to the original position. Save the
setting and shift to the previous hierarchy.
---
 cancel: cancels the settings and shifts to
the previous hierarchy.
Refer to:Panel Setup Menu on page62