MUTOH ValueJet 1304 - Page 69

User’s Guide ValueJet 1304
Handling the printer
AP-75780 - Revision 1.3 69
4
Platen heater menu
Sets up the Platen heater temperature.
Set up this menu to warm up the ink and improve the print quality.
Note
 Preset temperature of Platen Heater varies depending on the media.
Setup item Settings Description
Platen Heater
OFF/ <30°C> to 50°C
Sets up the Platen heater temperature.
1 = Roll media
2 = Platen Heater
3 = Print head
---
 ENTER: saves the setting and shifts to the
previous menu.
 CANCEL: Cancels the setting and shifts to
the previous menu
Refer to:User media menu on page63