NEC Aspire Series - Page 122

Programming
10-03 : PCB Setup
112 ◆ Networking
For SLIU Unit
For COIU Unit
For DIOPU Unit
For TLIU Unit
Physical Port Number 01-16
Item
No.
Item Input Data Default
01 Logical Port Number Through Software 3.07: 0-256
From Software 4.0E+: 0-384
0
02 Not used
03 Transmit Gain Level (S-Level) 1-63 (-15.5 +15.5dB) 32 (0dB)
04 Receive Gain Level (R-Level) 1-63 (-15.5 +15.5dB) 32 (0dB)
Physical Port Number 01-08
Item
No.
Item Input Data Default
01 Logical Port Number 0-200 0
Physical Port Number 01-08
Item
No.
Item Input Data Default
01 LD/OPX assignment 0 = LD Trunk
1 = OPX Trunk
0
02 Logical Port Number 0 = For LD Trunk 0-200
1 = For OPX Through Software 3.07:
0-256
From Software 4.0E+:
0-384
0
Physical Port Number 01-08
Item
No.
Item Input Data Default
01 Logical Port Number 0-200 0
02 2/4Wire 0 = 2Wire
1 = 4Wire
1