NEC Aspire Series - Page 168

Programming
14-01 : Basic Trunk Data Setup
158 ◆ Networking
06 SMDR Print Out
Use this option to have the system
include/exclude the trunk you are pro-
gramming from the SMDR printout. See
Program 35-01 and 35-02 for SMDR
printout options.
0 = No print out
1 = Prints out
0
07 Outgoing Calls
Use this option to allow/prevent outgoing
calls on the trunk you are programming.
0 = prevented
1 = allowed
1
08 Toll Restriction
Use this option to enable/disable Toll
Restriction for the trunk. If enabled, the
trunk follows Toll Restriction program-
ming (ex: Programs 21-05, 21-06). If dis-
abled, the trunk is a toll free line.
0 = Restriction disable
1 = Restriction enable
1 21-04
21-05
21-06
09 Private Line
Use this option to enable/disable a trunk’s
ability to be used as a Private Line.
0 = Private line disable
1 = Private line enable
0
10 DTMF Tones for Outgoing Calls
Use this option to enable (1) or disable (0)
DTMF tones for outgoing trunk calls.
0 = disable
1 = enable
0
11 Account Code Required
Use this option to enable (1) or disable (0)
Forced Account Codes.
0 = disable
1 = enable
1
12 - Not Used - 1
13 Loop Disconnect Supervision
Use this option to enable (1) or disable (0)
loop supervision for the trunk. This option
is required for Call Forwarding
Off-Premise and Tandem Trunking
(including 2 B-Channel Transfer with
PRI) only.
0 = disable
1 = enable
1
14 Long Conversation Cutoff
Use this option to enable or disable the
Long Conversation Cutoff feature for each
trunk.
0 = disable
1 = enable
0 20-21-03
20-21-04
15 Long Conversation Alarm Before Cut
Off
Use this option to enable or disable the
Long Conversation Alarm for each trunk.
0 = disable
1 = enable
0 20-21-01
20-21-02
Item
No.
Item Input Data Default
Related
Program