NEC Aspire Series User Manual

Setting Up The Networking Feature
IP Networking
18 ◆ Networking
Quantity of Voice Paths Available
The quantity of voice calls that can be made at any one time are dependent on various factors.
● VOIPU Resource - A free VOIPU resource must be available at each Aspire system.
● Program 10-19 : The mode of each VOIPU resource can be conÞgured, modes 0 (ICM/Trunk)
or 3 (NTW) can be used by Aspire Networking calls.
● IP Network Bandwidth Restrictions - These limitations are beyond the scope of the Aspire. If
there is not enough bandwidth available the call can not be maintained.
VOIPU PCB IP Address Options
A static IP address can be assigned to the VOIPU PCB. The IP address can also be assigned by
DHCP by setting Program 84-04-01.

NEC Aspire Series Specifications

General

Series	Aspire
Protocols	SIP, H.323
Lines	IP
Extensions	Digital, IP
Voicemail	Integrated Voicemail System
Networking	IP Networking
Power Supply	100-240V AC, 50/60Hz
Dimensions	Varies depending on the system module
Weight	Varies depending on the system module