NEC SL1100 - Page 139

5. Press the STA softkey. The display shows:
Store to Personal ABB
ENTER BIN
6. Press the One-Touch key in which the number is to be stored or dial 1~9, 0. If you press Hold
key, the next available One-Touch key will be used. The display shows:
Key ##:
xxxxxxxxxxxxx
If all One-Touch keys are used, the display shows “TABLE IS FULL”.
7. Press Hold key. The display shows:
KEY ##
-
8. Enter the name to be associated with the stored number. Refer to Table 1-7 Keys for Entering
Names on page 1-124.
9. Press Hold key. The display shows:
KEY PROG STA
10. Press Speaker key.
The telephone returns to an idle condition.
Temporary Memory
An unanswered call causes the Call History key (PRG 15-07 or SC 751: 08) to flash, indicating a new
call was placed in the temporary memory. If enabled in programming, the telephone display shows
CHECK LIST.
1. Press the Call History key (PRG 15-07 or SC 751: 08) or press the List softkey and CID.
- OR -
Press the Left Cursor key twice.
The last addition to the list is displayed.
2. Press the ARROW DOWN softkey to scroll through the list of numbers in memory.
3. Press the DEL softkey to delete the entry and scroll to the next entry.
4. The Call History key remains on as long as entries remain in memory.
5. To place a call back to a number in the temporary memory list, with the number to be dialed
displayed, press a line or Speaker key. (Refer to Table 1-7 Keys for Entering Names on
page 1-124.)
The outgoing call is placed.
To display Caller ID for a call in Park:
PRG 15-02-08 is set to 0 (preselect) for this feature.
ISSUE 2.0 SL1100
Features and Specifications Manual 1-127
C