Private Line
Description
A Private Line is a trunk reserved for a Multiline Terminal for placing and answering calls. A user with
a Private Line always knows when important calls are for them. Additionally, the user has their own
trunk for placing calls that is not available to others in the system.
Conditions
• Incoming Only - The Multiline Terminal has a Private Line only for incoming calls. The user cannot
place calls on the Private Line.
• Outgoing Only - The Multiline Terminal has a Private Line only for outgoing calls. The Private Line
does not ring for incoming calls.
• Both Ways - The Multiline Terminal has a Private Line for both incoming and outgoing calls.
• Private Lines do not follow Call Forwarding if not Direct Inward Line (DIL).
• Other programmed options for outgoing calls also affect a Prime Line.
• Calls to extensions with DND active do not follow Call Forwarding programming. Direct Inward Line
(DIL) calls ring an idle Department Group member, then follow PRG 22-08 then PRG 22-05.
• An extension user can have Line Preference options applied to their Private Line.
• A Private Line can also be a Prime Line.
• You should always program a line key for each Private Line.
• Private Lines are available on Single Line Terminals.
• Private Lines follow normal Toll Restriction.
• An extension user can transfer their Private Line. If other users have hold access, the destination
can answer the transferred Private Line and place it on Hold.
• NEC does not recommend assigning ringdown to a private line.
Default Settings
Disabled
System Availability
Terminals
All Stations
Required Component(s)
None
Related Features
Call Forwarding
Central Office Calls, Placing
SL1100
ISSUE 2.0
1-606
Private Line
P
To Next Page
Loading...
