If power cutting set “on” manually during scheduled power cutting “off” state, power cutting “on” state
continues until next power cutting “off” time.
The system does not start the cutting telephone power until next schedule.
Time schedule
Operation
0:00 6:00 19:00 19:000:00 0:006:00
0:00 6:00 19:00 19:000:00
Cancel the cutting telephone power by manual operation.
Power “off” state
Power “on” state
0:006:00
Figure 1-15 Time Schedule 1
Vice versa if power cutting is set “off” manually during scheduled power cutting “on” state, power
cutting “off” state continues to next power cutting “on” time.
The system does not start the power supply until next schedule.
Set the cutting telephone power by manual operation.
Power “off” state
Power “on” state
Time schedule
Operation
0:00 6:00 19:00 19:000:00 0:006:00
0:00 6:00 19:00 19:000:00 0:006:00
Figure 1-16 Time Schedule 2
• During power cutting “off” state,
- Outgoing calls can not be made.
- Incoming calls receive a busy tone.
- Call forward features work at the forward set terminal.
- Disables Both Ring CFW / Follow Me.
Power saving mode
• The system activates power saving mode when the Multiline Terminal is idle or no incoming calls
are received during the programmed time period. This darkens the brightness of all Line Key and
feature key LED's on the Multiline Terminal. This feature does not affect the display of the terminal.
• Power saving mode can be set for each terminal individually.
• Any key operation or incoming call at the terminal ends the power saving mode and all LEDs return
to normal brightness.
ISSUE 2.0
SL1100
Features and Specifications Manual 1-261
E
To Next Page
Loading...
