NEC SL1100 - Ring Option

4. Press Enter Cursor key to show Phone Setting mode.
510:Phone Setting 1/8
>Not Used
Display
(This display indication is for IP and Multiline Terminals.)
5. Press Up/Down Cursor key to select “Display”.
520:Phone Setting 2/8
>Display
Ring Option
(This display indication is for IP and Multiline Terminals.)
6. Press Enter Cursor key to select “Contrast”.
521:Display 1/5
>Contrast
Minimum Brightness
(This display indication is for IP and Multiline Terminals.)
7. Press Enter Cursor key to show the LCD Contrast Adjustment mode.
Contrast 1/x
Down Up
Contrast 5
(This display indication is for IP and Multiline Terminals.)
8. Press Left/Right Cursor key to adjust the contrast level.
9. Press Enter Cursor key to save the change that been made.
10. Press Exit key to exit the Navigation Mode.
ISSUE 2.0 SL1100
Features and Specifications Manual 1-543
N