No
Yes
Continued
from
previous
page
Should the Caller ID
number, DID number, or
Caller ID name be displayed
in the SMDR output?
DID
Number
In PRG 35-02-15, enter
1 to display the DID
number.
Caller ID Name
In PRG 35-02-15, enter 2 to
display the Caller ID name.
In PRG 35-02-14, enter 1.
In PRG 35-02-15, enter 1.
In PRG 35-02-16,
enter 0.
Trunk
Name
Received
Number
Dialed
Should the SMDR report
include the trunk port names,
received number dialed for
ANI/DNIS and DID trunks, or
both?
In PRG 35-02-16,
enter 1.
Both
In PRG 35-02-16,
enter 2.
In PRG 35-02-17,
enter 0.
Should the SMDR report
include the Account Code or
Caller ID name?
Account
Code
In PRG 35-02-17,
enter 1.
Caller ID
name
In PRG 35-02-18,
enter 0.
Should the Caller ID Name
appear on the same line as the
call record?
In PRG 35-02-18,
enter 1. Selecting
this option inserts
line feed and up to
24 characters can
be displayed for the
Caller ID name.
Stop
Figure 1-53 SMDR Flowchart (Continued)
Operation
Once installed and programmed, SMDR operation is automatic.
SL1100
ISSUE 2.0
1-718
Station Message Detail Recording
S
To Next Page
Loading...
