Drop Key
Description
The Drop Key abandons a call while retaining the PBX/Centrex line to originate another call. The Drop
key is provided by programming a Programmable Function key. This feature allows Flash key to be
used to provide a hookflash to the PBX or Central Office. A Single Line Terminal user can use the
Drop key function by an access code.
Conditions
• The Drop key provides a timed disconnect signal on CO/PBX lines.
• The Drop key cannot be used for internal, DID calls.
Default Settings
None
System Availability
Terminals
All Stations
Required Component(s)
None
Related Features
Flash
PBX Compatibility/Behind PBX
Guide to Feature Programming
Program Num-
ber
Program Name Default
11-12-42 Service Code Setup (for Service Access) - Flash on
Trunk lines
#3
11-12-59 Service Code Setup (for Service Access) - Trunk Drop
Operation for SLT
660
14-02-03 Analog Trunk Data Setup - Flash Type 0
14-02-04 Analog Trunk Data Setup - Hooking Type 0
15-02-05 Multiline Telephone Basic Data Setup - Transfer Key
Operation Mode
0
SL1100 ISSUE 2.0
1-258
Drop Key
D
To Next Page
Loading...
