EasyManua.ls Logo

NEC SL1100 - Table 1-47 Feature Support Table for Standard SIP Device

NEC SL1100
864 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
T.38 (Fax) is supported for 3rd Party SIP "IP Single Line Terminal (SIP)" station ports.
PRG 15-03-03 must be set to 1 (Special) at the receiving terminal in order for T.38 to function.
When using 3rd party SIP stations, the SIP server name can not contain a parenthesis.
The Exclusive Hold Recall Timer is used when an internal call from a Single Line telephone or 3rd
party SIP telephone is placed on Hold.
Each SIP phone that is registered to the SL1100 requires the following license: SL-IP-SIPEXT-1 LIC
(License Code 5111).
Table 1-47 Feature Support Table for Standard SIP Device
Feature Name Standard SIP Comments Note
Abbreviated Dialing/Speed Dial No
Account Code - Forced/Verified/
Unverified
Yes Depending on SIP device the account code may
have to be part of the dial string.
Account Code - Forced/Verified/
Unverified
No
Account Code Entry Yes Depending on SIP device the account code may
have to be part of the dial string.
Account Code Entry No
Alarm No
Alarm Reports No
Alphanumeric Display Yes Some SIP devices have Alphanumeric Displays
and are backlit. However, the display is not upda-
ted with CPU messages.
Analog Communications Interface
(ACI)
No
Ancillary Device Connection No
Answer Hold/Automatic Hold No
Attendant Call Queuing No
Automatic Call Distribution (ACD) No (V1.5 Added)
Automatic Release Yes
Automatic Route Selection (ARS/F-
Route)
Yes
Background Music No
Barge-In No
Call Arrival (CAR) Keys No
Call Duration Timer No Call Duration timer is a function of the client de-
vice and is not the system timer.
Call Forwarding Yes Can be programmed in 24-09-xx, through feature
code from administrator desk set and from the SIP
device using dial access codes. In some cases
Call Forwarding can be set on SIP device itself but
this not system side forwarding.
Call Forwarding with Follow Me No
Call Forwarding, Off-Premise Yes Can be programmed in 24-09-xx, through feature
code from administrator desk set and in some ca-
ses from the SIP device using dial access codes.
Call Forwarding, Off-Premise No
Call Forwarding/Do Not Disturb
Override
No
Call Monitoring No
Call Redirect No
Call Waiting/Camp-On No
ISSUE 2.0 SL1100
Features and Specifications Manual 1-443
I

Table of Contents

Other manuals for NEC SL1100

Related product manuals