Guide to Feature Programming
Program Num-
ber
Program Name Default
11-12-21 Service Code Setup (for Service Access) - Meet-Me
Answer to Specified Internal Paging Group
764
11-12-22 Service Code Setup (for Service Access) - Meet-Me
Answer to External Paging
765
11-12-23 Service Code Setup (for Service Access) - Meet-Me
Answer in Same Paging Group
763
15-07-01 Programmable Function Keys Refer to Programming Manual.
20-06-01 Class of Service for Extensions Extension 101 is Class 15 and other Exten-
sion are Class 1
20-10-06 Class of Service Options (Answer Service) - Meet-Me
Conference and Paging
COS 01~15 = 1
31-02-01 Internal Paging Group Assignment - Internal Paging
Group Number
Port 1~16 : 1(Group 1)
Port 17~ : 0
31-02-02 Internal Paging Group Assignment - Internal All Call
Paging Receiving
0
31-03-01 Internal Paging Group Settings - Internal Paging
Group Name
Refer to Programming Manual.
For additional programming information on Paging, refer to the Paging, External on page 1-559 and
Paging, Internal on page 1-564 features.
Operation
Meet Me External Paging Transfer
To make a Meet Me External Paging Transfer:
1. At the Multiline Terminal, while on a call, press Hold key.
- OR -
At the Single Line Terminal, while on a call, hookflash.
2. Dial Paging code [External 703 or Combined (
1)] and the Paging Zone.
3. Announce the call.
4. From a Multiline Terminal, when the paged party answers, press Transfer key or the Transfer
softkey.
- OR -
From a Single Line Terminal, when the paged party answers, hang up.
The party is transferred.
To join a Meet Me External Paging Transfer:
1. At the Multiline Terminal, press Speaker key or pick up handset.
- OR -
At Single Line Terminal, lift the handset.
2. Dial 765.
3. Dial the announced External Paging Zone (1~3).
The Paging party is connected.
SL1100 ISSUE 2.0
1-500
Meet Me Paging Transfer
M
To Next Page
Loading...
