NEC SL1100 - Required Software

System Availability
Terminals
All IP Multiline Terminals
Required Software
None
Required Component(s)
CPU with VoIPDB installed
Related Features
None
Guide to Feature Programming
IP Multiline Station (SIP):
Program
Number
Program Name Default
10-12-02 CPU Network Setup - Subnet Mask 255.255.255.0
10-12-03 CPU Network Setup - Default Gateway 0.0.0.0
10-12-09 CPU Network Setup - IP Address 172.16.0.10
10-26-01 IP System Operation Setup - Peer to Peer Mode 1
10-46-01 Server Information Setup - Register Mode 0
15-05-15 IP Telephone Terminal Basic Data Setup - CODEC Type 1 (Type 1)
15-05-39 IP Telephone Terminal Basic Data Setup - CTI Override
Mode
0
15-05-45 NAT RTP Send Port Number Selection
Effective only when PRG 10-46-14 is set to NAT mode.
Select sending RTP port number to remote Router, use from
negotiation result (0) or received RTP packet (1)
1
84-10-01 ToS Setup - ToS Mode 0
84-10-07 ToS Setup - Priority (D.S.C.P. - Differentiated Services
Code Point)
0
84-22-01 DR700 Multiline Logon Information Setup - User ID No setting
84-22-02 DR700 Multiline Logon Information Setup - Password No setting
84-22-03 DR700 Multiline Logon Information Setup - User ID Omis-
sion
0
84-22-04 DR700 Multiline Logon Information Setup - Log Off 1
84-22-05 DR700 Multiline Logon Information Setup - Nick Name No setting
84-26-01 VoIPDB Basic Setup - IP Address 172.16.0.20
84-26-02 VoIPDB Basic Setup - RTP Port Number VoIP GW1 = 10020
ISSUE 2.0 SL1100
Features and Specifications Manual 1-429
I