NEC SL1100 - Table 1-51 Supported Service Codes

Maximum 32 Mobile extensions can be assigned in a system. Initially, 4 user licenses are included, to
increase the number of users SL-SYS-MOBILE-1 LIC is required.
Features
The features available from a Mobile Extension are listed below. As the Mobile Extension is based on
an SLT port, the service codes used are as per an SLT port. Any feature not listed should be assumed
to be not supported:
• Hold
• Transfer
• Incoming Ring Group member
• Department Group member
• DID
• Toll Restriction
• Class of Service
• DSS Keys
Though DSS keys are available for the Mobile Extension, they cannot provide an exact indication of
busy status if, for example, the Mobile Extension is active on a call not linked to the SL1100.
The following service codes are supported:
Table 1-51 Supported Service Codes
Type Incoming Feature Program Code Set By Mobile
Extension
Set to Mobile
Extension
Night Mode Switching 11-10-01 718 Yes
Night Mode Switching for Other Group 11-10-12 618 Yes
Call Forward - All 11-11-01 741 Yes Yes
Call Forward - Busy 11-11-02 742 Yes Yes
Call Forward - No Answer 11-11-03 743 Yes Yes
Call Forward - Busy/No Answer 11-11-04 744 Yes Yes
Call Forward - Both Ring 11-11-05 745 Yes Yes
Call Forward - Follow-Me 11-11-07 746 Yes Yes
Do Not Disturb 11-11-08 747 Yes
Answer Message Waiting 11-11-09
*
0 Yes
Cancel All Messages Waiting 11-11-10 773 Yes
Automatic Transfer Setup for Each Extension
Group
11-11-25 602 Yes
Automatic Transfer Cancellation for Each Ex-
tension Group
11-11-26 603 Yes
Delayed Transfer for Every Extension Group 11-11-28 605 Yes
Delayed Transfer Cancellation for Each Exten-
sion Group
11-11-29 606 Yes
DND Setup for Each Extension Group 11-11-30 607 Yes
DND Cancellation for Each Extension Group 11-11-31 608 Yes
Pilot Group Withdrawing 11-11-35 650 Yes
Station Speed Dial Number Entry 11-11-39 755 Yes
Bypass Call 11-12-01 707 Yes Yes
Conference 11-12-02 #1 Yes
Override (Off-Hook Signalling) 11-12-03 709 Yes
Set Camp-On 11-12-04 750 Yes Yes
ISSUE 2.0 SL1100
Features and Specifications Manual 1-511
M