NEC SL1100 - Table 1-21 CPN for Standard Calls

Dial Number Preview is when a telephone number is first dialed (previewing the number in the display)
then Speaker or a line key is pressed to place the call.
Conditions
• If PRG 21-01-10 is programmed with an entry other than 0, a call does not have a talk path unless
the user dials at least the number of digits entered in this option when placing an outgoing call. This
means that an entry of 4 or higher in this program causes a problem when dialing 911. Since it is
only a 3-digit number, the call does not have a talk path, preventing the emergency dispatcher from
hearing the caller. This option should be kept at its default setting of 0 to prevent any problem with
dialing 911.
• CAMA Trunks are not supported.
• The 911 Cut Through feature works when dialing trunk Access+911.
Calling Party Number (CPN)
CPN sent when making a normal trunk call from a terminal.
Table 1-21 CPN for Standard Calls
PRG 20-08-13 PRG 21-12-01 PRG 21-13-01 CPN: PRG
Off Not Assigned Not Assigned
None
*1
Assigned
None
*1
Assigned Not Assigned 21-12-01
Assigned 21-12-01
On Not Assigned Not Assigned
None
*1
Assigned 21-13-01
Assigned Not Assigned 21-12-01
Assigned 21-13-01
Off Not Assigned Not Assigned
None
*1
Assigned
None
*1
Assigned Not Assigned 21-12-01
Assigned 21-12-01
On Not Assigned Not Assigned
None
*1
Assigned 21-13-01
Assigned Not Assigned 21-12-01
Assigned 21-13-01
*1. The CPN provided is from the service provider.
CPN sent when making a normal trunk call from a Virtual Extension (VE).
ISSUE 2.0
SL1100
Features and Specifications Manual 1-267
E