NEC SL1100 - Table 1-20 Basic Tone Table - Tone 39

Tone 14
Unit Basic Tone Duration Gain Level
8 0 - No Tone 0ms
Table 1-20 Basic Tone Table - Tone 39
Tone 39
Unit Basic Tone Duration Gain Level
1 0 - No Tone 500ms 32
2 11 - 480/620Hz, -13/-13dB 500ms 32
3 0 - No Tone 500ms 32
4 11 - 480/620Hz, -21/-21dB 500ms 32
5 10 - 440/480Hz, -16/-16dB 1000ms 32
6 0 - No Tone 2000ms 32
7 0 - No Tone 0ms
8 0 - No Tone 0ms
Operation
To listen to the incoming ring choices:
1. Press Speaker key.
2. Dial 711.
3. Dial 1 to check ringing for intercom calls.
- OR -
Dial 2 to check ringing for trunk calls.
4. For Intercom calls, select the pitch you want to check (1~7).
- OR -
For trunk calls, select the pitch (1~7) you want to check.
5. Go back to step 4 to listen to additional choices or press Speaker key to hang up.
To change the pitch of your incoming ring (Multiline Terminal only):
1. Press Speaker key.
2. Dial 720.
3. Dial 1 to change ringing for Intercom calls.
- OR -
Dial 2 to change ringing for trunk calls.
4. Select the pitch (1~7).
5. Press Speaker key to hang up.
SL1100
ISSUE 2.0
1-250
Distinctive Ringing, Tones and Flash Patterns
D