NEC SL1100 - Figure 1-41 KSU View; Figure 1-42 Analog Trunk Settings

Select analog trunk port 1
Figure 1-41 KSU View
Then screen changed to analog trunk settings and click "IRG" icon, see below Figure 1-42 Analog
Trunk Settings on page 1-594.
This Data Setting can be also entered from Navigation Bar, Analog Trunks icon.
Click IRG icon
Figure 1-42 Analog Trunk Settings
Then "Incoming Ring Extension" dialog is indicated.
When "Incoming Ring Extension" dialog is opened, the check box indicates current IRG member as
On.
SL1100
ISSUE 2.0
1-594
PC Programming - Intuition Setup
P