Multiple Trunk Types
Description
The SL1100 supports many different Trunks in the system (DID, Loop Start, ISDN PRI). The system
supports up to 84 trunks using expanded KSUs.
DID
Refer to the Direct Inward Dialing (DID) on page 1-215 feature for related information.
Loop Start Trunks
Loop Start Trunks can be connected to the SL1100 system. Loop Start is assigned per trunk at the
associated unit.
ISDN PRI
Refer to the ISDN Compatibility on page 1-460 feature for related information.
T1-E1 Trunks
The T1/PRI/E1 Interface gives the system T1/E1 trunking ability. This unit uses a single universal slot
and provides up to 24/30 trunk circuits. In additional to providing digital-quality trunking, the T1/PRI
Interface allows you to have maximum trunking ability with fewer units. This in turn makes more
universal slots available for other functions.
Conditions
• When adding or removing padding for trunks, use PRG 14-01 for all trunks.
Default Settings
None
System Availability
Terminals
All Terminals
Required Component(s)
Any Trunk Unit
Related Features
Automatic Route Selection
Caller ID
ISSUE 2.0
SL1100
Features and Specifications Manual 1-525
M
To Next Page
Loading...
