Illuminated Dial Pad
Description
Illuminated Dial Pad let the IP4WW-[ ]TXH-B-TEL and IP4WW-24TIXH-C-TEL to illuminate their Dial
Pad. Dial Pad can be illuminated in two ways.
• When the phone received call or made called.
• When the phone are set to illuminated automatically.
Figure 1-19 Light Sensor
Conditions
• In PRG 15-02-66 user can adjust the brightness of Dial Pad to 8 different levels.
• In PRG 15-02-46 user can set interval for the backlight to be on.
• In PRG 15-02-61 user can set Max brightness.
• In PRG 15-02-62 user can set Min brightness.
• In IP4WW-24TIXH-C-TEL, IP4WW-24TXH-B-TEL, IP4WW-12TXH-B-TEL it is equipped with Light
Sensor. This sensor can set brightness up to 13 levels. If the sensor detects the light it can turn
on/off the illumination automatically. At PRG 15-02-65 if it the brightness is below the number it will
illuminate the terminal and if it is above the setting it will turn off the illumination. If PRG 15-02-65 is
set to 0 it will work by the setting done at PRG 15-02-64. In this case PRG 15-02-61 will control the
brightness when to turn on and PRG 15-02-64 will control the brightness when to turn off.
• PRG 15-02-64 will be set automatically when the System started.
It will set the setting each time system is started. If you move the phone after System is started it may not
work properly.
• If you are operating illumination automatically (PRG 15-02-63: 1) it will not illuminated when you
receive call or touching the Dial Pad like you do when automatically setting is OFF.
• After time set at PRG 15-02-46 LCD will fade but Dial Pad will not fade but will turn off immediately.
Default Settings
Enabled (Automatic Illumination is Disabled)
ISSUE 2.0
SL1100
Features and Specifications Manual 1-357
I
To Next Page
Loading...
