NEC SL1100 - Table 2-3 Service Codes by Feature

Dial this Service
Code. . .
1
When you . . . For this feature. . . Also see
Function
Key. . .
Note
1
Except where indicated, dial Service Code from Intercom dial tone (e.g., press idle Speaker key first).
776 Clear number saved by Last
Number Redial.
Last Number Redial -
782 Route ANI/DNIS to the VRS. It
can also be used to transfer to
VRS.
Transfer Voice Response
Service (VRS)
-
783 Enable the data communication
auto-answer mode.
Data Communications -
785 Clear the number saved by Save
Number Redial.
Save Number Redial -
790 Use Voice Over after calling a
busy extension.
Voice Over 48
794 Split between two calls on a
SLT.
Call Waiting -
799 Test Callback operation for a
SLT.
Callback -
Service Codes by Feature
Table 2-3 Service Codes by Feature
For this fea-
ture...
Dial this Service Code...
1
When you ... Also see
Function
Key...
Note
1
Except where indicated, dial Service Code from intercom dial tone (e.g., press idle Speaker
key first).
Speed Dialing 753 + bin + number + Hold + Name +
Hold to store
Store System Speed Dialing num-
bers.
-
754 + bin + number + Hold + Name +
Hold to store
Store Group Speed Dialing num-
bers.
-
#2 + bin Dial a System Speed Dialing num-
ber.
27
#4 + bin Dial a Group Speed Dialing number. 28
#7 + bin Use Personal Speed Dialing. -
Account Codes
*
+ Enter Account code +
*
Enter an Account Code. -
Hookflash + ## + Enter account code
+ Hookflash
Enter an Account Code at an SLT. -
Alarm 727 + 1 or 2 + time, or 727 + 1 or 2 +
9999 to cancel
Check, set or cancel an alarm. -
Alphanumeric Dis-
play
678 + 0~14 Select the language used on display
Multiline Terminals.
-
Wireless DECT
(SIP)
689 Transfer a Wireless DECT (SIP) call
when out of range.
-
SL1100 ISSUE 2.0
2-8
Codes Tables