NEC SL1100 - Phone Setting; System Setting

6. Press “D” to search “Dave”.
211:Search 1/x
D
Dave
(This display indication is for IP and Multiline Terminals.)
Top Right = Shows Number of Search that has a “D”
Bottom = Shows the Contacts
7. Press the Enter Cursor key to indicate Number.
Dave 1/x
>Dial/PVT:203
(This display indication is for IP and Multiline Terminals.)
8. Press Speaker key or Off-Hook to make outgoing call.
Enter Navigation mode and change phone setting - adjust LCD contrast.
<Program>
PRG 15-02-60: Advanced Mode1
1. With a Multiline Terminal in an idle condition the display shows:
1-17 TUE 10:52AM
201
Menu Dir VM:xx CL:xx
(This display indication is for IP and Multiline Terminals.)
2. Press Enter Cursor key to enter Navigation mode. The display shows:
100:Operation List 1/6
>Call History:xx
Contacts
(This display indication is for IP and Multiline Terminals.)
xx = List Number
3. Press the Down Cursor key to select “Phone setting”. The display shows:
500:Operation List 4/6
>Phone Setting
System Setting
(This display indication is for IP and Multiline Terminals.)
SL1100
ISSUE 2.0
1-542
Navigation Key
N