Below is example where Hardware is not able to be attached to the system. Please change the number of
Extension or Trunks to accommodate the Hardware unit.
Intuition Setup Page 4 - KSU View
"Intuition setup page 4" linked from "Intuition setup page 3". At this screen all previous Intuition Setup
1 to 3 settings (Trunks, Extension, and External Device) are shown. It shows an image of each KSU
configurations and can see visually how the Hardware and Terminals are setup.
Figure 1-40 Intuition Setup Page 4 - KSU View
1. KSU Selection
At Main Work Area only one KSU configuration can be indicated on the screen. In order to see other
KSU configuration, please select the KSU Image to see other KSU configuration.
2. Ex/Trk Free Port List
This list indicates free port number of extension and trunk. This number is increased or decreased
when configuration is changed at KSU View automatically.
3a, 3b. Slot/Package
This area indicates package information, slot number, and package name. At Image view various
configurations can be set using Drag & Drop of packages or terminals from Slide Panel Area.
4. Slide Panel
ISSUE 2.0
SL1100
Features and Specifications Manual 1-591
P
To Next Page
Loading...
