NEC SL1100 - Figure 1-43 Incoming Ring Extension Settings; Table 1-62 Terminal Type

1. Day/Night Mode Switch Tab
2. Terminal Type
3. IRG member
4. Check box
Figure 1-43 Incoming Ring Extension Settings
1. Day/Night Mode Switch Tab
Select Day/Night mode number for PRG 22-05.
"Day" is set to Mode1; "Night" is set to Mode2 at IPG Settings.
2. Terminal Type
Terminal type and photo are indicated. Refer to Extension (Terminal) Type on page [Error:
Reference Table is not found.] for supported terminals.
3. IRG member
Extension number stored in PRG 11-02 or PRG 11-04 is indicated. When VMI is assigned at PRG
22-05, "InMail" is indicated.
4. Check box
When check box is set to On that terminal is assigned to the IRG at PRG 22-04.
When set to Off that terminal is removed from the IRG at PRG 22-04.
1. When "Incoming Ring Extension" dialog is opened, the check box indicates current IRG member as
On.
2. InMail check box can not be Off when VMI (IRG = 102) is assigned at PRG 22-05.
Table 1-62 Terminal Type on page 1-595 indicates kind of supported terminals and its photos at IPR
Settings.
Table 1-62 Terminal Type
Type Photos
MLT
SLT
VE
Doorphone
DSS
ISSUE 2.0 SL1100
Features and Specifications Manual 1-595
P