NEC SL1100 - Page 254

Making an Internal Page using your DSS Console (Needs to set at 30-03):
1. Press the DSS Console Internal Page zone key (Group key 1~32).
If the zone you want is busy, try again later.
If you do not have Handsfree, lift the handset to make your announcement.
Internal Page Busy Lamp Field
When the DSS key is...
On
Off
The Internal Page zone is...
Busy
Idle
Switching the Night Service mode from your DSS Console (Needs to set at 30-03):
1. Press the Night Service key.
Night Service Busy Lamp Field
When this key is ON...
DAY
NIGHT
BREAK
NIGHT 2
The system is in the...
Day 1 Mode
Night 1 Mode
Break 1 Mode
Night 2 Mode
Using a DSS Console key as a One-Touch or Programmable Function key:
A user can have DSS Console keys programmed as One-Touch keys. These keys can be used for Direct
Station Selection, Trunk Calling, Personal Speed Dial, Speed Dialing, and Service Code access. The stored
service code cannot be longer than three digits.
1. Press the DSS Console key for function.
For example, you can forward your calls by pressing the DSS key + dial 1 + destination. Your the
DSS key must have been previously programmed for Call Forward.
SL1100 ISSUE 2.0
1-242
Direct Station Selection (DSS) Console
D