NEC SL1100 - Page 293

Program
Number
Program Name Default Note
11-10-24 Service Code Setup (for System Administrator) -
SMDR - Group Accumulated Printout Code
622
11-10-25 Service Code Setup (for System Administrator) - Ac-
count Code Accumulated Printout Code
623
11-10-26 Service Code Setup (for System Administrator) -
Forced Trunk Disconnect
not assigned
11-10-27 Service Code Setup (for System Administrator) -
Trunk Port Disable for Outgoing Calls
645
11-10-32 Service Code Setup (for System Administrator) - Set
Private Call Refuse
646
11-10-33 Service Code Setup (for System Administrator) - En-
try Caller ID Refuse
647
11-10-34 Service Code Setup (for System Administrator) - Set
Caller ID Refuse
748
11-10-35 Service Code Setup (for System Administrator) - Di-
al-In Mode Switching
609
11-10-41 Date Setting 789
11-10-42 Maintenance Service 643
11-10-43 VRS Incoming 778
11-10-44 Cutting the telephone power
Sets the Service Code for power cutting. (for Administra-
tor)
PRG 11-10-44 Input dial is Max 8 digits.
731
11-10-45 Room Monitor Permit
Sets Service Code (SC) for Room monitor on/off to ter-
minal.
SC+1+Extension Number ; Room Monitor enable
SC+0+Extension Number ; Room Monitor disable
610
11-10-46 Watch Message Setting
Service Code setting for Watching message recording to
VRS
614
11-10-47 Warning Message Setting
Service Code setting for Warning message recording to
VRS.
615
11-10-48 Auto Dial Setting for Security Sensor
Service Code setting for destination number when Warn-
ing mode detected.
617
11-10-49 Auto Dial Setting for Remote Inspection
Service Code setting for destination number when re-
mote inspection detects no answer
619
11-10-50 Night-mode Skip (Own Group) 787
11-11-01 Service Code Setup (for Setup/Entry Operation) -
Call Forward - All
741
11-11-02 Service Code Setup (for Setup/Entry Operation) -
Call Forward - Busy
742
11-11-03 Service Code Setup (for Setup/Entry Operation) -
Call Forward - No Answer
743
11-11-04 Service Code Setup (for Setup/Entry Operation) -
Call Forward - Busy/No Answer
744
11-11-05 Service Code Setup (for Setup/Entry Operation) -
Call Forward - Both Ring
745
11-11-07 Service Code Setup (for Setup/Entry Operation) -
Call Forwarding - Follow Me
746
11-11-08 Service Code Setup (for Setup/Entry Operation) - Do
Not Disturb
747
ISSUE 2.0 SL1100
Features and Specifications Manual 1-281
F