NEC SL1100 - Page 305

Program Number Program Name Default
21-01-18 System Options for Outgoing Calls - Reset Dial After
Failure of Trunk Access
Set to 0 (on) for Forced Trunk Disconnect to work.
1: Disable
Operation
To disconnect a busy trunk:
Multiline Terminal
1. Press a line key for trunk.
- OR -
Dial trunk access code (#9 + trunk number).
You hear busy tone. Trunk numbers are 001~084.
2. Dial the Service Code (PRG 11-10-26).
You hear confirmation beeps as the system disconnects the trunk.
You can now place a call on the free trunk.
3. Press the line key for the trunk disconnected in step 2.
- OR -
Dial the trunk access code (#9 + trunk number) for the trunk disconnected in step 2.
Single Line Terminal
1. Dial trunk access code (#9 + trunk number).
You hear busy tone. Trunk numbers are 001~084.
2. Dial Service Code (PRG 11-10-26).
You hear confirmation beeps as the system disconnects the line.
3. Hookflash.
You can now place a call on the free line.
4. Dial the trunk access code (#9 + trunk number) for the trunk disconnected in step 2.
ISSUE 2.0 SL1100
Features and Specifications Manual 1-293
F